The winter months have chilly air, hot chocolate, and electrical water heater problems. Most of us have gotten into the shower first thing on a cold winter’s morning in hopes of driving the chill away with some warm water, only to find an icy cold stream in the faucet. What a nightmare!
Cold water is one of the worst things to experience during winter. That’s why most homes have hot water heaters in Brooklyn to keep the family warm and cozy throughout the day. But what is one supposed to do if the electric water heater decides not to cooperate on a particularly cold day? Well, you’re in need of heater repairs by a plumbing service in Brooklyn for sure! However, while you wait for the plumbing contractors to reach, here are some ways to solve your water heater tankless problems.
Check the Thermostat
Before diving straight into costly electric water heater repairs, make sure you go over to where your heater is installed and look at the thermostat first. You’d be surprised to find out how often people don’t realize that their water heater’s thermostat isn’t on, and that’s the only reason their taps don’t have hot running water.
Yes, the fix could be this simple! Be sure to check the thermostat and ensure that it is set to the correct level. If you find that the thermostat is on, but the water is still cold, it could result from a lack of power to the water heater or a faulty thermostat. In this case, you will need to call a plumbing service in Brooklyn to replace the thermostat and check for any other issues in your water heater.
If you notice that the water is warm, not hot, it could be because the water heater is undersized. You can request the plumber to assess whether your heater is sized correctly and make any recommendations for additional installations.
Inspect the Circuit Breaker
A water heater that isn’t warming up your water could be a result of a tripped switch or the heater not getting any power. You could also have one or more elements of the heating system not working, which results in an interrupted heating system.
The best way to handle this is by inspecting the circuit breaker in the heater’s service panel to ensure that it hasn’t tripped. If you notice that it has tripped, try switching it off and then on again. On the other hand, if the breaker hasn’t tripped, you should try setting the high-temperature limit on the water heater. You can do this by turning off the breaker and removing the access panel for the upper heating elements. Then, remove the safety guard and insulation and press the red button, which signifies the temperature cutoff.
Replace all the elements in their place and turn on the breaker. That should solve the problem.
Look at the Water Capacity
Another reason why your tankless water heater isn’t producing enough hot water, or even hot enough water, is because the unit is too small. This means that the water heater simply isn’t storing enough water to be able to heat it up and readily supply it throughout the house.
Your water heater should have about 75% capacity for hot water. So, if your demand for hot water is 50 gallons, your water heater should be able to accommodate at least 38 gallons of water. If the demand is high, the hot water will quickly run out, leaving you with cold water coming out of the shower midway through.
If you find out that your water heater’s capacity needs to be increased and you can’t get new installations done anytime soon, there are some ways to manage the situation for a better hot water supply.
- Limit the length of your showers.
- Don’t let the shower run before you enter it.
- Invest in low-flow shower heads.
- Do the dishwashing and laundry during different parts of the day.
Look for Signs of Corrosion
Finally, if you notice that the hot water coming from your taps has a dirty, brown color or smells weird, it could be a result of corroded pipes. This corrosion could happen inside your water heater or in your home’s water pipes. The best way to determine what’s causing this issue is by hearing out to a plumbing service in Brooklyn – Nationwide Plumbers.
Contact us
Nationwide Plumbers is one of the service providers that will send a professional contractor to assess your water system and determine what’s causing the issue. They will also check the water heater thoroughly to eliminate any problems that could be occurring in it and service it well to prevent water heating issues in the future.